Categories


expert help graphic final

LP350

Formerly – LP350, LP350X

RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit).

CAUTION: Not recommended for residential, office buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744–5070 for inspection and assembly testing information.

TEMPERATURE: –40°F to +180°F (–40°C to +82°C) continuous service. Warning: Do not convey LP Gas over +140°F (60°C).

CONSTRUCTION: Tube: Type A (Chloroprene). Black. 1 1/2″ – 3″. Type C (Nitrile). Black. 1/4″ – 1 1/4″.

Reinforcement: Braided or spiral synthetic textile.

Cover: Type A (Chloroprene). Black. All sizes are perforated.

Design Factor: 5:1

COUPLINGS: 72 Gates Power Crimp™ for 3/4″, 1 1/2″ and 2″ I.D. or 75 Gates GLX™ sizes 1/4″ to 1 1/4″. For Power Crimp™ ferrules, reference the Hose Coupling Section. Do not use male swivel, reusable or O–ring type couplings. For 3″ I.D. use Dixon

LP Boss only.

STANDARDS: CAN/CGA–8.1–M86. NFPA 58, Section 8–3.5. Underwriters Laboratories Standard No. 21. (Applies to all sizes).

Ask Our Experts

We have the knowledge & expertise to guide you to the right solution for all your hydraulic, pneumatic and industrial hose and fitting requirements.